If you're looking for the Best Hydrogen Generator on the market, then you've found it! The H2-Hydro-Gen is the most efficient Hydrogen Generator you can find anywhere.
The H2-Hydro-Gen will convert gasoline or diesel engines (Sizes 1.2 L to 7.0 L) to a Hydrogen/Gas or Hydrogen/Diesel Hybrid Vehicle.
This kit comes complete with everything you need to install in about an hour.
These check valve are critical safety devices to any Automotive Hydrogen System. They prevent flashback into the Hydrogen Generator from an engine backfire.
These finished adaptor adjust the front O2 sensors to the top of the exhaust manifold where there is more Oxygen and Fuel. This give a higher voltage output from the O2 sensor to the ECU causing it to reduce the amount of fuel being delivered by the injectors.
This is based off our award winning H2-Hydro-Gen design just with more and large electrodes in a large container.
The H2-Hydro-Gen II is a Hydrogen Generation and Delivery Systems for Big Rigs that converts gasoline or diesel engines (Sizes 7 L to 20 L) to a Green Hybrid Vehicle.
Comes complete with everything you need to install in about an hour.
This relay allows you to connect the Hydrogen Generator power directly to Battery and have the unit turn on only when engine is running.
Threaded Barbed Elbows connect delivery hose (¼ ID) from the Hydrogen Generator to the intake manifold. Made of chemical resistant nylon. Will not oxidize like brass units and will not crack with age like PVC units.
Convert gasoline or diesel engines (Sizes 1.2 L to 7.0 L) to a Hydrogen/Gas or Hydrogen/Diesel Hybrid Vehicle. Install in about two hours. Including Hydrogen Tuning Flash Drive configured for your vehicle.
This Hydrogen Tuning Flash Drive updates the reference tables in your car ECU so it recognizes lean burn condition when Hydrogen is introduced into the engine and adjust timing and amount of fuel being delivered to the engine you can maximize your engines efficiency.

Kit Includes:
H2-Hydro-Gen Mounting Bracket and Hardware, Hose and Hose Hangers, Hose Barb, Check Valve, 12 gage wire (10’ Red & Black), Wire connectors, ATC Blade Fuseholder, Fuse, Electrolyte Solution (NaOH)*, Funnel, Nitrile gloves, Hydrogen Tuning Flash Drive, nstruction Manual (with pictures)
* Ships as DOT Hazardous Material
Hazardous Material
Today larger and more consistent MPG gains can be achieved in both Gasoline and Diesel engines by Hydrogen Tuning. Hydrogen Tuning involves updating of a 3-dimensional table of values inside your cars ECU called a map.
This table tells your fuel injectors exactly how much fuel to deliver given current air temperature, density, engine speed, throttle position, and even provides new values for the O2 sensor. By updating these reference tables in your car ECU so it recognizes lean burn condition when Hydrogen is introduced into the engine and adjust timing and amount of fuel being delivered to the engine you can maximize your engines efficiency.
1 L of Sodium Hydroxide Solution . This is one of the best electrolytes to use for these system because it does not break down or degrade over time. This means week after week your Hydrogen production will be consistent.
Threaded ¼ NPT Plug. for fill and drain ports. Made of chemical resistant Nylon. Will not oxidize like brass units and will not crack with age like PVC units.
Kit Includes:
H2-Hydro-Gen
Mounting Bracket and Hardware
Hose and Hose Hangers
Hose Barb
Check Valve
12 gage wire (10’ Red & Black)
Wire connectors
ATC Blade Fuseholder
Fuse
Electrolyte Solution (NaOH)*
Funnel
Nitrile gloves
Instruction Manual (with pictures)
* Ships as DOT Hazardous Material

